Skip to content
5V USB Adaptor Plug for Deluxe Electric Dog Fence
30 Day Money Back Guarantee
100% Australian Owned
Free shipping on all orders over $150
1 Year Product Warranty
5V Charging Plug for the Deluxe USB Dual Splitter Charging cable.
USB Charging cable sold separately.
Specifications
- Size: 3.5 x 1.35mm (0.13 x 0.05 inches)
- Colour: Black
- LED Power Light: Green
Note: This plug operates on AC220V-AC240V for Australia, New Zealand, Europe, and most other countries, and AC110V for USA and Canada. These voltages are set based on your location at purchase. Should you require a different voltage than your region's standard, please contact us directly to arrange a suitable alternative.
Package Contents & Bonuses
DELIVERY
We know you’ll be keen to receive your order as quickly as possible. Please make sure you provide us with a valid delivery address and contact phone number so we can contact you if there are any issues with your consignment.
Our couriers require the recipient’s phone number for each delivery. We can’t book your delivery unless you have provided us with a valid daytime phone number.
We pack every order carefully to ensure it reaches you in good condition. Your order will be sent through UPS and USPS.
All consignments are tracked. The tracking number can be viewed from within your eBay Purchases page.
If you have any questions about delivery, please contact us and we will do our best to make sure you’re happy.
NEED HELP?
Business hours:
Open 27/7
Phone: 855 650 0730(US)
Email: hello@petcontrolhq.com.au
During business hours we aim to respond within a few hours. If you send us a message late in the day, after hours, over the weekend, or on a public holiday, we will reply as soon as we can on the next business day.
"It's our love for Animals & Passion for our products that sets us apart from the rest."
Blog posts
The Ultimate Guide to Backyard Chicken Care: Happy Hens, Healthy Eggs
Beyond feed and water, backyard chickens require secure and well-maintained coops, balanced nutrition, and predator protection.
Natural Defense: Understanding Ticks, Fleas, and the Power of Neem Oil for Your Pet and Livestock
Ticks and fleas are more than just a nuisance—they can cause serious health issues, from tick paralysis to severe skin allergies.
Essential Pet Dental Care Tips for Optimal Health
We’re here for you
Deluxe Electric Dog Fence with and without Remote FAQs
What are the dimensions and weight of the receiver collar?
• Size: 7 x 4 x 3 cm (2.75 x 1.57 x 1.18 inches)
• Weight: 190 g (6.7 oz)
What neck sizes does the collar strap fit?
The adjustable collar strap fits dogs with neck sizes from 21 cm to 68 cm (8.27 to 26.77 inches).
How much wire comes with the kit?
Each system includes 150 metres of boundary wire (approx. 492 feet), covering roughly one-third of an acre. Additional 150 m or 300 m rolls are available for larger areas.
What dog sizes is the system suitable for?
Designed for dogs weighing between 5 kg and 70 kg (11 to 154 lbs).
Is the collar waterproof?
Yes. The collar has an IPX7 waterproof rating, meaning it can be submerged in up to 1 metre of water for 30 minutes.
What is the collar’s activation range from the wire?
The receiver collar activates when your dog is within 1.5 to 2 metres (4.9 to 6.6 feet) of the boundary wire.
Can the system operate in freezing temperatures?
Yes. The system functions between –20°C to +60°C (–4°F to 140°F). Note that cold weather may reduce collar battery life.
Does the boundary wire need to be buried?
No. You can install the wire in several ways:
• Above ground: Run it through a conduit such as a garden hose or poly pipe.
• Mounted: Fix it to a fence (avoid metal fences).
• Underground: If preferred, bury the wire 10–15 cm (4–6 inches) below ground.
The collar works with the remote but not with the fence. What should I check?
• Ensure the metal prongs are firmly attached.
• Reset the collar battery by disconnecting and reconnecting the internal battery wire.
• If the issue persists, internal IC damage from repeated drops may be the cause. Contact customer support.
The collar isn’t working with the remote. What should I do?
• Ensure the collar is in dual mode (remote + fence), indicated by one green LED flash every 5 seconds.
• If it's in fence-only mode (flashing twice), hold the power button until the LED returns to single flashes.
• Refer to your user manual to re-pair the collar with the remote.
Why is my dog receiving corrections inside the safe area?
• Loop too small: Layouts under 80 m may require a resistor to stabilise the signal.
• Interference: Keep the wire at least 3 m from underground or overhead electrical lines.
• Sharp corners: Use rounded corners (1 m radius) to avoid erratic signal behaviour.
Why does the system only work in certain areas?
• Always use matching wire thickness and type for extensions.
• Avoid placing the wire near metal fences, sheds, or structures; maintain a 3 m distance.
Why is the transmitter box not powering on?
• No green LED on plug: The power adaptor may be faulty—replace the adaptor.
• Green LED on but system not functioning: The transmitter box may be damaged by a power surge or lightning.
Where should I place the transmitter box?
• Indoors or in a sheltered area (use a waterproof enclosure if installed outdoors).
• Keep at least 3 m from electrical appliances (e.g. fridges, air conditioners).
• If installing on a metal shed, insulate with a 10 cm wooden spacer.
What’s the difference between the Deluxe and Standard systems?
Deluxe System
Correction Levels: 3 automatic progressive levels
Collar Waterproofing: IPX7 (fully waterproof)
Wire Type: Heavy-duty
Coverage Area: Up to 10 acres
Additional Features: Dual-mode (fence + remote trainer)
Standard System
Correction Levels: 4 manually controlled levels
Collar Waterproofing: IPX4 (water-resistant)
Wire Type: Robust standard wire
Coverage Area: Up to 10 acres
Additional Features: Fence mode only
How do I perform a short loop test?
1. Disconnect the boundary wire from the transmitter box.
2. Attach a 20–30 m (66–98 ft) loop of spare wire.
3. Set the transmitter to Level 5.
4. Use the included test bulb to check the collar near the wire – it should light up if the system is working.
Why does the collar only respond when directly above the wire?
• The transmitter setting may be too high or low for your layout. Adjust accordingly.
• Check that the collar’s prongs are facing upwards towards the wire.
• Test the collar at dog height (20–50 cm) above ground level.
Why is the transmitter box constantly beeping?
• A wire break may have occurred. Disconnect and test with a short loop.
• Check for loose wire connections at the terminal.
• If beeping continues, the transmitter may be damaged from electrical issues.
How far apart should I place the training flags?
Install training flags 1 metre apart along the boundary zone to visually mark the safe area during training.
For more tutorial videos, please visit our Deluxe Electric Dog Fence System Overview and Troubleshooting Guides page.
